Thursday, September 20, 2012

TOYOTA ACR50 FACELIFT PJ5 BI-XENON PROJECTOR RETROFIT

Today i'm going to share about Toyota estima acr50 facelift projector retrofit. Acr50 stock headlamp with D4S xenon projector, car owner want to make it more powerful with bi-xenon function and to fulfill him.
This is the front and rear view of stock D4S xenon projector. The shield is also the bracket between projector and leveling adjuster, i need to use the shield(bracket) to modify and fit in new projector, so i must remove it from the stock projector.
After take out the shield, i just measure the size of the new projector's body and marked on the shield(make sure perfect fitting). 2nd step, use cutter follow the line and trim the unwanted part carefully.
Attach the new projector on the bracket for projector balancing part, make sure the projector is on 90 degree on the shield(bracket), and screw or tie it up. Picture shown pj5 2.6" H1 bi-xenon projector front and rear view.
After that, screw the projector on the adjuster and attach it back to the headlamp base. Put it into oven for few mins, waiting for the sealant melt and join the front cover back on the headlamp base.
Complete work! from outlook cant see any different? But actually performance increase a lot! For Pj5 2.6" H1 bi-xenon projector performance refer to the following picture.

As picture shown, there is light off view, low beam view and high beam view. Light out put for pj5 H1 low beam average light distance coverage around 45 to 50meters(base on car high level)! and high beam over 80meters++.

video

contact:
desmond - +60127102617
[sms 24hours, call from 10am to 10pm]
email: satuga_projector@hotmail.com
facebook: search "csb-pro autolight trading"


FOR MORE INFORMATION PLEASE CLICK " OLDER POST " AT THE BOTTOM PART OF THE WEB TO VIEW MORE CAR MODEL, THANK YOU.

Tuesday, September 18, 2012

BMW 7 SERIES(E38) BI-XENON PROJECTOR HEADLAMP

Recently super duper busy on work since we moving to new workshop. Sorry for no update the blog for so long. By the way today i'm going to show you guys about BMW E38 projector retrofit. =)
This is bmw 7 series(e38) 1997 model, car owner with the same problem with "hid kits with reflector headlamp". As owner mention the light out put is not even, and it's real glare on the road. Of cause to be a friendly road user and get better light out put we suggest projector retrofit.
Left: This is the reflector headlamp before projector retrofit. Right: After fit in H3z 2.6" bi-xenon projector lens with 5000k hid kits.
E38 headlamp is actually very easy to dismantle the front headlamp cover, there is just 6 metal clips around the side of the headlamp. The clips removed, you can take out the cover easily. After dismantle the front cover, remove the reflector bowl from the headlamp base for next step projector fitting.
From the left picture u can see about the hid burn mark on the lens, because this lamp going to fit in projector lens, so i just removed the cover, and we don't need it anymore. We just using the low beam reflector bowl as adjuster, because the low beam reflector function is already replaced by projector.
For low beam reflector bowl i just spray it into matte black, because i'm trying to make the projector more outstanding, secondly reduce any reflective surface around the projector (minimize the unwanted light that may glare to other road user).
After reflector paint job, i just measure the reflector space and match a suitable projector for it. For this light i'm using 2.6" pj3 bi-xenon projector, you guys can see the projector is much outstanding because of the matte black background color.
Screw the reflector back on the headlamp base after projector adjustment and fitting. just close it back easily with 6 metal clips. Gosh, it is just big different compare to stock headlamp isn't it? with a good looking, some of you may ask me how about the light out put? is it for practical use or just for good looking? yes ofcos! it's performance kits, I'm using taiwan 2011 year pj3 H3Z projector headlamp for the retrofit work. Last picture at the bottom you guys can see the projector's performance in basement parking.
COMPLETE WORK on car! Pj3 projector is not only increase the light out put, and also increase much on outlook. do you agree? =)
-PJ3 2.6" bi-xenon projector -5000k 40w hid kits
contact:
desmond - +60127102617
[sms 24hours, call from 10am to 10pm]
email: satuga_projector@hotmail.com
facebook: search "csb-pro autolight trading"
location: subang jaya, selangor.


FOR MORE INFORMATION PLEASE CLICK " OLDER POST " AT THE BOTTOM PART OF THE WEB TO VIEW MORE CAR MODEL, THANK YOU. For more details or information please leave me email or contact my cellphone, because i'm not online often. THANKS=)

Thursday, June 28, 2012

CSB-PRO NEW LOCATION

Guys, We had moved to subang jaya usj1 since June 2012, this is the new location show in google map. ADDRESS: LOT 552, S/L 8-A, JALAN PERSIANRAN SUBANG, 47600 SUBANG JAYA, SELANGOR. OPERATION HOUR: Monday to friday 10am to 7pm. Saturday 10am to 4pm. CONTACT NUMBER: desmond lim - +60127102617

Tuesday, May 15, 2012

MITSUBISHI LANCER GT/ EVO X 2012 WITH PJ5(D2S/H7) BI-XENON PROJECTOR

Mitsubishi Lancer GT/ EVO X, This model in Malaysia doesn't come with any projector lens, owner worry about if upgrade to hid will bring trouble to other driver, so he decided to upgrade hid kits with projector lens. As he tried our 06 year BMW e46 projector lens on his previous car(waja), and he gonna try out the latest projector lens since i did the projector comparison last few months in the blog.
i'm trying to make it as close as original design, so i'm using the latest pj5 dedicate projector shroud on it. As owner require the headlamp without any fancy accessories and design, but the headlamp match with car overlook just right.
After installation, is time to adjust and test the lighting as usual, owner was shock with the light output compare to his previous car that installed with the e46 projector. Car and the wall distance is about 20 meters, and you can see the Z point(center point) is full of purple line, and the center lighting is cover average.
contact:
desmond - +60127102617
[sms 24hours, call from 10am to 10pm]
email: satuga_projector@hotmail.com
facebook: search "csb-pro autolight trading"


FOR MORE INFORMATION PLEASE CLICK " OLDER POST " AT THE BOTTOM PART OF THE WEB TO VIEW MORE CAR MODEL, THANK YOU.

MAZDA 6 WITH 10 CCFL MODIFICATION.

This is the Mazda6 2007 model, the headlamp comes with the 4 light which is combine low beam projector, high beam, signal light and fog light projector.
As owner require, i install 10 ccfl for the headlamp which is 8 angel eyes(outer ccfl ring) and 2 demon eyes(inner ccfl ring), i'm using PC 3mm/T ccfl rings for the modification.
For those multi ccfl rings installation, i will more recommend for white or yellow, outlook will be more simple and clean. This headlight is not look complicated in visual, because there is 4 white ccfl rings match with the red demon eyes. In the night time this is the real focus point on the road. For those ccfl installation is only increase the outlook, it won't be glare or bring trouble to incoming car.
contact:
desmond - +60127102617
[sms 24hours, call from 10am to 10pm]
email: satuga_projector@hotmail.com
facebook: search "csb-pro autolight trading"
location: subang jaya, selangor.


FOR MORE INFORMATION PLEASE CLICK " OLDER POST " AT THE BOTTOM PART OF THE WEB TO VIEW MORE CAR MODEL, THANK YOU.

Friday, May 11, 2012

HONDA CRV 06 WITH PJ3 BI-XENON PROJECTOR

Honda CR-V 06, this is the facelift version, which is with the quad reflector headlamp(low beam and high beam seperated). Owner Mr.Shafiq gonna change the existing headlamp to a new look, beside of smoke the headlamp with 600'c high.temp paint, he also looking for the brighter lighting and not to glare to other driver on the road. So, i'm using the TAIWAN LIGHTMASTER's lastest production pj3 projector and 40W hid kits lighting system.
The reason of i'm adhere to using TAIWAN LIGHTMASTER products, because of the medium price with grade A quality(refer to the feedback of this projector in my facebook account). I had tired to try those cheap china projector lens, focus point and light output is real weak. United State products like fx-r is really good projector, but pricing is much more higher than taiwan kits.
After few years doing experiment in projector lighting system, i found out taiwan projector with reasonable price and amazing lighting performance(show as last photo). Even the brightness(lux) is the highest number i never get before, lux: 733 x 100cd maximum! comapare to old taiwanese e46 replica projector it is 423 x 100cd maximum, from the number we can see taiwanese products get breakthrough. That's what the reason i prefer to taiwanese products. link(projector performance comparison): http://satugaprojector.blogspot.com/2011/12/projector-lens-comparison.html
as picture show, i'm using LIGHTMASTER pj3 bi-xenon projector lens, bi-xenon projector which mean high beam and low beam function within a projector. The spacing of the headlamp is big, so installation takes me only about 5 hours with complete work.
Basement parking is my BFF.=D because daytime we cant test for the lighting, so basically i will just go to the basement parking and adjust the headlamp. In the picture i'm adjusted about 85' degree, and the lighting can go through at least 50 meters(suv)! the high beam definitely can get at least 70 meters++, and u will ask me how about the projector wider view? i will say in malaysia it is more than enough, it can be shoot 5 lane on highway(i will share in next few post). P/S: for any question about projector and lighting system, you can send a msg to my indox.
contact:
desmond - +60127102617
[sms 24hours, call from 10am to 10pm]
email: satuga_projector@hotmail.com
facebook: search "csb-pro autolight trading"


FOR MORE INFORMATION PLEASE CLICK " OLDER POST " AT THE BOTTOM PART OF THE WEB TO VIEW MORE CAR MODEL, THANK YOU.

Wednesday, May 9, 2012

HONDA CITY 4G WITH BI-XENON PROJECTOR

Honda city 4g which is the H4 reflector headlamp, because of the halogen bulb with stock headlamp the owner cant really see clear the road during night time, so he decide to upgrade to H4 hid kits. After upgrade to hid kits, as owner mention, always keep flashing my in coming car. Because it is really glare, are you realize H4 reflector matching with the hid kits you can only see though the 5 to 15 meters? ( additional issue is no high beam function).
My question is why do you spend for a lighting system you cant really see the road and hurt to other people?=) i will suggest you guys who planing to upgrade H4 halogen bulb to hid system, do not change it. because you may bring trouble to incoming car and yourself. for H4 car i will recommend stand for stock halogen bulb, if you wan to use hid please looking for a projector which is wont bring the danger to incoming car.
This is the Pj3 projector light out put, as picture show it is 35w 5000k hid kits, but do you guys realize both size the wall with a very clean cut off line? yes, it is the function of shield, projector with the function cut off the unwanted light (glare), that's why i said the hid must match with hid kits. As in the picture the light output is shooting to 40meters ++ and high beam 70meters++, compare to hid system on H4 reflector 5 to 15meters(brightest lighting coverage) do you think it is enough? and no high beam is it safety for your journey?
contact:
desmond - +60127102617
[sms 24hours, call from 10am to 10pm]
email: satuga_projector@hotmail.com
facebook: search "csb-pro autolight trading"


FOR MORE INFORMATION PLEASE CLICK " OLDER POST " AT THE BOTTOM PART OF THE WEB TO VIEW MORE CAR MODEL, THANK YOU.

HONDA ACCORD 2010 WITH PJ3 BIXENON PROJECTOR

This is honda accord 2010 2.4 model, the headlamp reflector is special design for D2R(hid) use, somehow it is still glaring sometime. The owner require for projector retrofit which is even using hid kits, won't be glare to incoming car. I'm using pj5 for the retrofit work which is support for H7/D2S.
since the retrofit work need to open the headlamp, owner add on the 4 white ccfl rings.
From the picture, you can see the headlamp is very simple and clean, because owner do not want the fancy design, so i just try the way to make it as simple as possible.
contact:
desmond - +60127102617
[sms 24hours, call from 10am to 10pm]
email: satuga_projector@hotmail.com
facebook: search "csb-pro autolight trading"
location: subang jaya, selangor.


FOR MORE INFORMATION PLEASE CLICK " OLDER POST " AT THE BOTTOM PART OF THE WEB TO VIEW MORE CAR MODEL, THANK YOU.

BMW E34 QITH QUAD ANGEL EYES.

Hey guys, I'm so sorry i had a long long time did update my blog, i have a good news which is about we moving to new workshop in june. i was super busy about that, thats why i have no time to write the blog.
This is the bmw e34, because of the headlamp age over 15 years, so owner plan to re-condition. i'm replace the 4 glass lens and add on the quad angel eyes and 40w H1 high performance hid kits.
contact:
desmond - +60127102617
[sms 24hours, call from 10am to 10pm]
email: satuga_projector@hotmail.com
facebook: search "csb-pro autolight trading"


FOR MORE INFORMATION PLEASE CLICK " OLDER POST " AT THE BOTTOM PART OF THE WEB TO VIEW MORE CAR MODEL, THANK YOU.

Friday, February 24, 2012

PERODUA MYVI WITH QUAD ANGEL EYES.





This is the new local car model in malaysia, it's call perodua myvi. It's 2011 new model, for the chubby body scale is pretty cute, this is the top selling car in malaysia. As owner require, he do not want to did the same with other car, so that he combine 2 tones color into the headlamp. In the picture we can see that the blue color and the purple color angel eyes is showing pretty cool. i pretty enjoy the process for the modified, it's something different with what i did before. It's a good try. =)

contact:
desmond - +60127102617
[sms 24hours, call from 10am to 10pm]
email: satuga_projector@hotmail.com
facebook: search "csb-pro autolight trading"
location: subang jaya, selangor.


FOR MORE INFORMATION PLEASE CLICK " OLDER POST " AT THE BOTTOM PART OF THE WEB TO VIEW MORE CAR MODEL, THANK YOU.