TOYOTA ACR50 FACELIFT PJ5 BI-XENON PROJECTOR RETROFIT

Today i'm going to share about Toyota estima acr50 facelift projector retrofit. Acr50 stock headlamp with D4S xenon projector, car owner want to make it more powerful with bi-xenon function and to fulfill him.

This is the front and rear view of stock D4S xenon projector. The shield is also the bracket between projector and leveling adjuster, i need to use the shield(bracket) to modify and fit in new projector, so i must remove it from the stock projector.

After take out the shield, i just measure the size of the new projector's body and marked on the shield(make sure perfect fitting). 2nd step, use cutter follow the line and trim the unwanted part carefully.

Attach the new projector on the bracket for projector balancing part, make sure the projector is on 90 degree on the shield(bracket), and screw or tie it up. Picture shown pj5 2.6" H1 bi-xenon projector front and rear view.

After that, screw the projector on the adjuster and attach it back to the headlamp base. Put it into oven for few mins, waiting for the sealant melt and join the front cover back on the headlamp base.

Complete work! from outlook cant see any different? But actually performance increase a lot! For Pj5 2.6" H1 bi-xenon projector performance refer to the following picture.

As picture shown, there is light off view, low beam view and high beam view. Light out put for pj5 H1 low beam average light distance coverage around 45 to 50meters(base on car high level)! and high beam over 80meters++.

contact:
desmond - +60127102617
[sms 24hours, call from 10am to 10pm]
email: satuga_projector@hotmail.com
facebook: search "csb-pro autolight trading"

FOR MORE INFORMATION PLEASE CLICK " OLDER POST " AT THE BOTTOM PART OF THE WEB TO VIEW MORE CAR MODEL, THANK YOU.