Saturday, October 18, 2014

ALL-NEW MAZDA 6 WITH 2.8" PJ5 BI-XENON PROJECTOR + LIGHT BAR



All-New Mazda 6, This is 2.0cc version which comes with H11 halogen projector, as car owner own a Mazda 3 2.0cc version before his new m6, which comes with bi-xenon projector lens that he used to it. Of cause the Halogen projector cannot fulfill him anymore. He is looking for something similar and powerful output projector kit. As he's our blog's follower, and decide to give us a chance to work it out. =D



I fitted the PJ5 H7/D2S projector lens to replaced the stock projector, New Mazda 6 doesn't easy to dismantle the front headlamp cover as it's run with "cold/hard seal", We spend almost 4 hours just to dismantle the cover by using special tools with very low damage.



Car own required to do something similar with 2.5cc version DRL, so i suggest to go for dual function LED Light Bar (chinese kit) and 4 pcs of Side Marker Light to replace the dim/parking light function. The Side Marker Light super bright isn't? It's 1.5w 14v smd.



The Led Light Bar is really outstanding during night time, and I apply 55w high power hid kit run with the PJ5 projector lens. The light output hit as high as 104800cd, extremely strong light output without glaring to incoming traffic.



PJ5 projector setup is so much powerful to compare to Mazda 6 2.5cc Bi-xenon kit. Mazda 6 2.5cc highest spec bi-xenon projector with 35w HID system, and our setup on this light to make the it run with stock high beam reflector + 55w Bi-xenon projector kit. It's serve in better lighting performance/coverage, no matter low beam or high beam.






As above picture show that the low and high beam light output, From the upper picture we can see the light get though at least 8 columns+, it's about 8 meters between each column, Its equal to about 64meters ++ on low beam! and the lower picture is to show the high beam light output, from the car distance to the end of the wall's distance at least 100meters++ and end of the wall is full coverage of light you can see the picture clearly. PJ5 serve impressing lighting coverage, don't you agree? =D

Please contact us to view the real product to believe!

CONTACT:

desmond - +60127102617
[sms 24hours, call from 10am to 10pm]
email: satuga_projector@hotmail.com
facebook: search "csb-pro autolight trading"


FOR MORE INFORMATION PLEASE CLICK " OLDER POST " AT THE BOTTOM PART OF THE WEB TO VIEW MORE CAR MODEL, THANK YOU.

MORE SAMPLE/ PICTURE PLEASE VISIT OUR FACEBOOK PAGE AT "CSB-PRO AUTOLIGHT TRADING"!!

Friday, October 17, 2014

KAWASAKI Z800 PROJECTOR RETROFIT




KAWASAKI had the largest big bike market in malaysia, Z800 is the hottest selling bike in kawasaki since end of 2012, its over 6000 units in malaysia market right now. This is one of our demo bike, We do try the lighting performance at night with a dark street since we got the bike, If your z800 owner, you will be feel the same way which is the speed over 110-120km/h and during dark road/street without any street light, it's totally not enough to cover the further view(which is over 40meters), It's not confidence for most rider to ride by cant see through the further view by slightly high speed.



Z800 body shape is attractive even though its on a 800cc bike, cos of the lamp limited lamp space, Im using 2.2" pj4 h1 bi-xenon projector lens + 40w H.I.D to apply into the lamp.




Decoration part, im just add in a blue CCFL into the projector and white CCFL surrounding the shroud. After fit the projector into the headlamp, surprisingly the projector looks bigger than what i expect. Fitting and spacing management pretty well with 2.2" projector.



As picture shown is the light output and brightness of the Pj4 projector, for the light shooting distance you can adjust with what you like. Low beam performance on freeway/ highway can shoot 60meters++ and high beam 100meters++, and wider view coverage for 3 lanes. If your the nigh ride lover and face the same problem with lighting coverage on your bike, please visit us for more details. =D



CONTACT:

desmond - +60127102617 
[sms 24hours, call from 10am to 10pm]
email: satuga_projector@hotmail.com
facebook: search "csb-pro autolight trading"


FOR MORE INFORMATION PLEASE CLICK " OLDER POST " AT THE BOTTOM PART OF THE WEB TO VIEW MORE CAR MODEL, THANK YOU.

MORE SAMPLE/ PICTURE PLEASE VISIT OUR FACEBOOK PAGE AT "CSB-PRO AUTOLIGHT TRADING"!!

NISSAN LATIO/TIIDA PJ3 BI-XENON PROJECTOR RETROFIT WITH LIGHT BAR


Nissan Latio Impul, some other country call it Nissan Tiida. Car owner just get it from used car dealer, and he find out the headlamp such a boring design (as he told haha). And he complain the stock H4 headlight output cant be fulfill him. So he decide to do something solve it.


As car owner mention, his main purpose to retrofit the light is to improve the light output, and design or decoration stuff at 2nd place. So usual Im using the Pj3 Bixenon projector for the retrofit work and match with the half-transparent shroud (benz c-class design). For the darken part, i use 600'c high temp spray paint apply on it but not all, i keep certain part of silver lining to make it not too dark.


From the picture we can see the effect through the transparent shroud. I apply the white CCFL surrounding the transparent part, and purple CCFL inside the projector lens. It's looks cool isn't? About the light bar, i just make it follow the edge of the reflector. The darken reflector makes the projector looks more outstanding. 



This is complete work after install back to the car. If you don't like fancy decoration lighting, We can make the projector without CCFL or Light Bar. As picture shown, it's very sporty looks but not too fancy.



For Custom headlamp we can apply anything you like, we do provide a lot of sample picture in our facebook page (csb-pro autolight trading), you guys may take a look on it or come to my shop to view the real product and performance.


*(LOW BEAM - 40w hid + pj3 bixenon projector light output)
Minimum shoot 55meters for normal salon car


 *(HIGH BEAM - 40w hid + pj3 bixenon projector light output)
Minimum shoot 100meters for normal salon car

CONTACT:

desmond - +60127102617 
[sms 24hours, call from 10am to 10pm]
email: satuga_projector@hotmail.com
facebook: search "csb-pro autolight trading"


FOR MORE INFORMATION PLEASE CLICK " OLDER POST " AT THE BOTTOM PART OF THE WEB TO VIEW MORE CAR MODEL, THANK YOU.

FORD RANGER BI-XENON PROJECTOR WITH DRL


Ford Ranger T6 the Truck of the year, the all-new model of ford ranger design is totally different compare the previous model. The body is huge, i feel excited that the 1st client looking for me to discussion about design of his T6. T6 headlamp design enough for me to play any design around.


Ford Ranger T5 the headlamp looks bigger than T6, but the space for custom work T6 will get more benefit into inner spacing, Both T5 & T6 can be fit in the biggest PJ series projector which is 2.8". Light output performance wise almost the same for both.



PJ3 Bi-xenon projector is produce by LightMaster Taiwan (haocheng international), we use it since 2010/2011, its the most reliable production for us. Its also the Hottest item that we sell compare all projector we have, i will be showing how's the light output performance later.



For the design wise, I apply Angel Eyes with few Day Running Light into the headlamp. The drl we are using 14v 1.5w led, but honestly i really adore the drl to match with the T6 headlamp this way, simple and clean.



If you prefer something Cool and Rock, this design may fulfill you, which is darken up the entire light (inner part) or add some color into the projector lens (inner ccfl ring/ demon eyes), its looks just like a monster.



Refer to the upper picture for the light output performance, i do compare the 40w and 55w hid system. 40w hid kit can hit as high as 73300cd and 55w hit 104800cd, which is about 45-46% high higher than 40w hid kit. For low beam distance for 4x4 truck(high level) can shoot minimum 65 to 70 meters, and high beam can shoot 150 meters easily.

If you wan to get to know more about PJ series projector please contact for more details, welcome to our shop to view the products and light output.

We provide 3years warranty on PJ series projector lens (Pj3, Pj4 and Pj5).

CONTACT:

desmond - +60127102617 
[sms 24hours, call from 10am to 10pm]
email: satuga_projector@hotmail.com
facebook: search "csb-pro autolight trading"


FOR MORE INFORMATION PLEASE CLICK " OLDER POST " AT THE BOTTOM PART OF THE WEB TO VIEW MORE CAR MODEL, THANK YOU.MORE SAMPLE/ PICTURE PLEASE VISIT OUR FACEBOOK PAGE AT "CSB-PRO AUTOLIGHT TRADING"!!